| |
|
|
circular magnetrons |
| specifications :: high temperature |
| |
| |
ONYX-2HT |
| |
Maximum Sputtering Power |
| |
| |
DC |
1.0 Kilowatts |
| |
RF |
600 Watts |
| |
Cathode Voltage |
100 to 1500 volts |
| |
Discharge Current |
0.1 to 2 amp |
| |
Operating Pressure |
0.5 to 50 milliTorr |
|
 |
|
| |
Cooling Requirements |
| |
| |
Flow Rate @ Max. Power |
0.75 GPM |
| |
Max. Input Temperature |
20° C |
| |
Max. Input Pressure [open drain] |
60 psig |
|
|
|
| |
Target |
| |
| |
Form |
Circular / Planar |
| |
Diameter |
2.00" / 50.80 mm |
| |
|
| 0.010" - 0.375" |
| (.254 mm - 9.525 mm) |
|
| |
Cooling |
Indirect |
|
|
|
| |
| |
Magnetic Enhancement |
Profiled NdFeB |
|
|
|
| |
|
|
|
| |
Mounting |
| |
| |
Source |
0.75" OD Tubing |
| |
Water |
0.25" OD Tubing |
| |
Power Connector, DC |
Type N, External Threads |
| |
Power Connector, RF |
Type HN, External Threads |
| |
Power Cable, DC |
RG 142 |
| |
Power Cable, RF |
RG 393 |
|
|
|
| |
| |
Maximum Temperature |
300° C |
|
|
|
| |
| |
Source to Substrate Distance |
2.00"
- 12.00" |
|
|
|
| |
Construction |
| |
| |
Cathode Body |
OFHC Copper |
| |
Anode |
304 / 316 Stainless Steel
|
| |
Insulator |
Macor |
|
|
|
| |
| Dimensions [See Below] |
| |
A |
2.80" / 71.12
mm |
| |
B |
2.24" / 56.90
mm |
| |
C |
0.06" / 01.52
mm |
| |
D |
0.75" / 19.05
mm Typical |
|
|
|
| |
|
| |
 |
Typical performance. Results may vary with process parameters
such as pressure, flow rate, target material, and substrate
rotation, etc. |
|
Some custom-engineered and specialty magnetrons may not meet
standard specifications. |
|
All Angstrom Sciences NdFeB magnets are totally encapsulated
and protected from degradation by water. |
|
All sources available in various external configurations. |
|
Specifications are subject to change without notice. |
|
|
